Selected Peer-Reviewed Publications
Law, D., Selvamani, A.S., Nava, L., 2023, "Combined Effect of Bubble Size and Gas Volume
Fraction on Natural Convective Heat Transfer Enhancement in Homogeneous Bubbly Flow:
Eulerian-Eulerian Numerical Simulations", ASME Journal of Heat and Mass Transfer.
Shepard, T., Law, D., Dahl, J., Reichstadt, R., Selvamani, A.S., 2023, “Impact of Aspect Ratio on
Drag and Flow Structure for Cylinders with Two Free Ends”, ASME Journal of Fluids
Engineering. https://doi.org/10.1115/1.4062575
Wei, J., Sun, C., Zhang, X.J., Wang, E.J., Law, D., 2022, “An efficient and accurate interpolation method for parametric curve machining”,
Scientific Reports. https://www.nature.com/articles/s41598-022-20018-9
Gonzalez, I. and Law, D., 2022, “Effect of Single Nanoparticle Diameter on a Nanochannel Fluid Flow and
Heat Transfer”, Proceedings of the ASME 2022 Fluids Engineering Division Summer Meeting,
FEDSM2022-86966, Toronto, Canada.
Law, D. and Malpaya, V., 2022, “A Mitigation Study of Air Treatment Technology with a
Physical Air Filter on Volatile Organic Compounds, Carbon Dioxide, and Fine Particulate
Matters Generated by Indoor Smoke”, Final Report, ASHRAE San Joaquin.
Tawfik, A., Law, D., Oldham, J., Grasis, J., and Salem, M., 2022, “COVID-19 Public Transit Bus Air
Circulation Study”, Final Report, California State University Transportation Consortium
(CSUTC) and Fresno State Transportation Institute (FSTI).
Shepard, T.G., Law, D., Menon, R.K., Ordahl, K., and Gutenberg, A., 2021, “Interference Drag and Flow
Structure around Cylinder-Sphere Junction”, Ocean Engineering, 234.
Lara, S., Law, D., 2020, “Effects of Convex Elements on Aerodynamic Drag of a Sphere”, 5th Thermal
and Fluids Engineering Conference (TFEC) Proceedings, TFEC-2020-32129.
Law, D., Hinkle, H., 2019, "Eulerian-Eulerian Modeling of Convective Heat Transfer Enhancement
in Upward Vertical Channel Flows by Gas Injection", ASME Journal of Thermal Science
and Engineering Applications, 10(2), pp. 024501.1-024501.5.
Law, D., and Shepard, T.G., 2018, “Three-Dimensional Volume of Fluid Simulations of Air Bubble
Dynamics in a Converging Nozzle”, Proceedings of the ASME 2018 5th Joint US-European
Fluids Engineering Summer Conference, FEDSM2018-83180, Montreal, Canada.
Shepard, T.G., Ruud, E., Kinane, H., Law, D., Ordahl, K., 2018, “BubbleFormation from Porous Plates in Liquid Cross-Flow”, Proceedings
of the ASME2018 5th Joint US-European Fluids Engineering Summer Conference,FEDSM2018-83221,
Montreal, Canada.
Ramirez, C., Law, D., 2017, "Effect of Drip Line Hydrocyclone Design on Head Loss for Agricultural
Irrigation", Proceedings of the ASME 2017 Fluids Engineering Division Summer Meeting,
FEDSM2017-69547, Waikoloa, HI.
Gartrell, J., Law, D., 2016, "Numerical Study on the Effect of Control Elements on Laminar Airflow over
a Flat Plate", Proceedings of the 14th International Mechanical Engineering Congress
& Exposition, IMECE2016-65767, Phoenix, AZ.
Wang, X.Y., Law, D., Tan, Z.Q., 2016, “Linear Instability of Charged Jet in Liquid-liquid System”, International
Conference on Material, Power and Energy Engineering, GP0305, Shenzhen, Guangdong,
China.
Hinkle, H., Law, D., 2016, “Gas Phase Distribution Effects on Heat Transfer in Upward Vertical Bubbly
Channel Flows”, Proceedings of the ASME 2016 Summer Heat Transfer Conference, 5th
Joint US-European Fluids Engineering Summer Meeting, and 14th International Conference
on Nanochannels, Microchannels, and Minichannels, HTFEICNMM2016-1062, Washington,
D.C.
Law, D., Shepard, T., Wardi, I., 2015, “A Combined Numerical and Experimental Study of
Air Bubble Dynamics in Converging Section of Effervescent Atomizer”, Proceedings of
the ASME-JSME-KSME Joint Fluids Engineering Conference 2015, AJK2015-21100, Seoul,
Korea.
Shepard T., Law, D., 2015, "A Comparison of Student Learning between Graded Homework and Suggested Problems",
122nd Annual Conference and Exposition ASEE 11386, Seattle, WA.
Wu, W., Li, W., Law, D., Na, W., 2015, “Improving Data Center Energy Efficiency Using Building Information
Modeling and Cyber-Physical Systems”, International Conference on Sustainable Design,
Engineering and Construction 2015, ICSDEC 2015-291, Chicago, IL.
Law, D., Shepard T., Strykowski P., 2014, "Numerical Simulations of Near-Nozzle Exit Characteristics
for an Effervescent Atomizer at Low Gas to Liquid Mass Flow Ratio", Proceedings of
the ASME Fluids Engineering Division, FEDSM2014-21290, Chicago, IL.
Law, D. and Valdez, A., 2014, “Computational Modeling and Simulations of Isothermal Plane
(Linear) Air Jet Velocity Profile for Slot Diffusers”, Proceedings of ASME International
Mechanical Engineering Congress and Exposition, IMECE2014-37317, Montreal, Canada.
Law, D., Battaglia, F., 2013, “Numerical Simulations for Hydrodynamics of Air-Water External
Loop Airlift Reactor Flows with Bubble Break-Up and Coalescence Effects”, ASME Journal
of Fluids Engineering, 135 (8), pp. 081302.1-081302.9.
Law, D., Jones, S.T., Battaglia, F., and Heindel, T.J., 2011, “A Combined Numerical and
Experimental Study of Hydrodynamics for an Air-Water External Loop Airlift Reactor”,
ASME Journal of Fluids Engineering, 133 (2).
Law, D., Battaglia, F., and Heindel, T.J., 2008, “Model Validation for Low and High Superficial
Gas Velocity Bubble Column Flows”, Chemical Engineering Science, 63.
